Download document () of 20
Send email
Download
You have exceeded the download limit
The CPM dual hexagon plugs are available in Industrial and Ex Series.
Both are designed to close off any unused entries in electrical equipment, whilst maintaining certifications and operating temperatures.
Depending on the chosen version, the nylon CPM plugs can be used:
•In various industrial environments, for the Industrial version
•In hazardous areas classified zones 1, 2 21 and 22 (Ex e and Ex t protection), for the ATEX version and in equivalent NEC locations
It has been designed with a sealing lip which allow to reach an IP66 without an additional gasket. By adding an optional IP washer (Oring or flat neoprene), an IP68, 5 bars / 30 minutes, is achieved.
CPM stopping plugs can be installed with a spanner / wrench, allen / hex head key or screwdriver with aperture pointing away from the equipment and tightened from the outside.
Made of grey or black nylon upon the version, CPM plugs are available with ISO metric and electrical Pg threadforms.
• Colour: Grey RAL 7035
• Operating temperature: -20 °C to +80 °C
Operating temperature can vary according to the seal option chosen. Please consult product datasheet for more detailed information.
• Certificates: cRUus & UKCA
• Thread options available:
ISO metric from ISO12 to ISO63 and electrical Pg from Pg07 to Pg48
• Colour: Black RAL XXXX
• Operating temperature: -30 °C to +90 °C
Operating temperature can vary according to the seal option chosen. Please consult product datasheet for more detailed information.
• Certificates: ATEX, IECEx, INERIS, CSA, UL & UKCA
• Thread options available:
ISO metric from ISO16 to ISO63 and electrical Pg from Pg09 to Pg42
Available configurations
Industrial:
ATEX:
Would you like to receive information about our products, certifications, documentations, etc.? Register by specifying "Conduit cable and wire management " in the "Products of Interest" menu.
Part number structure and how to buy
| THREAD / F | ALLEN / HEX KEY APERTURE H (MM) |
HEX HEAD A |
E | L |
| M12 | 5.15 | 15.00 | 13.25 | 5.90 |
| M16 | 6.20 | 19.00 | 13.25 | 5.90 |
| M20 | 8.20 | 23.00 | 13.25 | 5.90 |
| M25 | 10.20 | 28.00 | 13.25 | 6.90 |
| M32 | 12.20 | 36.00 | 13.10 | 7.40 |
| M40 | 12.20 | 44.00 | 13.10 | 7.40 |
| M50 | 12.20 | 54.00 | 13.30 | 7.90 |
| M63 | 14.20 | 67.00 | 15.00 | 8.40 |
| THREAD / F | ALLEN / HEX KEY APERTURE H (MM) |
HEX HEAD A |
E | L |
| Pg7 | 5.15 | 16.50 | 8.00 | 5.90 |
| Pg9 | 5.15 | 19.00 | 10.00 | 5.90 |
| Pg11 | 5.15 | 22.00 | 10.50 | 5.90 |
| Pg13.5 | 8.20 | 24.00 | 9.25 | 5.90 |
| Pg16 | 10.20 | 27.00 | 10.25 | 6.90 |
| Pg21 | 12.20 | 32.00 | 10.75 | 7.40 |
| Pg29 | 12.20 | 40.00 | 13.15 | 7.40 |
| Pg36 | 12.20 | 52.00 | 13.25 | 7.90 |
| Pg42 | 14.20 | 59.00 | 15.00 | 7.90 |
| Pg48 | 14.20 | 64.00 | 15.50 | 8.40 |
| THREAD / F | ALLEN / HEX KEY APERTURE H (MM) |
HEX HEAD A |
E | L |
| M16 | 6.20 | 19.00 | 13.25 | 5.90 |
| M20 | 8.20 | 23.00 | 13.25 | 5.90 |
| M25 | 10.20 | 28.00 | 13.25 | 6.90 |
| M32 | 12.20 | 36.00 | 13.10 | 7.40 |
| M40 | 12.20 | 44.00 | 13.10 | 7.40 |
| M50 | 12.20 | 54.00 | 13.30 | 7.90 |
| M63 | 14.20 | 67.00 | 15.00 | 8.40 |
| THREAD / F | ALLEN / HEX KEY APERTURE H (MM) |
HEX HEAD A |
E | L |
| Pg9 | 5.15 | 19.00 | 10.00 | 5.90 |
| Pg11 | 5.15 | 22.00 | 10.50 | 5.90 |
| Pg13.5 | 8.20 | 24.00 | 9.25 | 5.90 |
| Pg16 | 10.20 | 27.00 | 10.25 | 6.90 |
| Pg21 | 12.20 | 32.00 | 10.75 | 7.40 |
| Pg29 | 12.20 | 40.00 | 13.15 | 7.40 |
| Pg36 | 12.20 | 52.00 | 13.25 | 7.90 |
| Pg42 | 14.20 | 59.00 | 15.00 | 7.90 |
| DIGIT 1 AND 2 |
DIGIT 3 | DIGIT 4 AND 5 |
DIGIT 6 AND 7 |
DIGIT 8 | DIGIT 9 | DIGIT 10 | SUFFIX | 3 DIGITS | |||||
| Series | Material | Thread Size | Fillet Digits | Certification | Sealing / Installation | Plating | Special product or Pack | ||||||
| CP | M | 04 | M12* | 00 | E | Exe | X or Blank | No seal | Blank | None | S | Special product | Sequential number |
| 11 | M16 | F | Non-certified | U | O-ring / Undercut | X | None | P | Packaging variant | Packing quantity | |||
| 12 | M20 | B | Flat neoprene gasket/washer | Blank | Standard | Blank | |||||||
| 13 | M25 | C | Green composite gasket/washer | ||||||||||
| 14 | M32 | D | Locknut | ||||||||||
| 15 | M40 | E | O-ring + Locknut | ||||||||||
| 16 | M50 | F | Flat neoprene gasket/washer + Locknut | ||||||||||
| 17 | M63 | G | Green composite gasket/washer + Locknut | ||||||||||
| 18 | M75 | ||||||||||||
| 20 | Pg7 | ||||||||||||
| 21 | Pg9 | ||||||||||||
| 22 | Pg11 | ||||||||||||
| 23 | Pg13.5 | ||||||||||||
| 24 | Pg16 | ||||||||||||
| 25 | Pg21 | ||||||||||||
| 26 | Pg29 | ||||||||||||
| 27 | Pg36 | ||||||||||||
| 28 | Pg42 | ||||||||||||
| 29 | Pg48* | ||||||||||||
| Stopping plug | Nylon | M25 | - | Exe | Sealing | Plating | Suffix | - | 3 Digits | Part number |
| CP | M | 13 | 00 | E | B | Blank | Blank | - | Blank | CPM1300EB |
| CP | M | 13 | 00 | F | B | X | P | - | 200 | CPM1300FBXP-200 |
| CP | M | 13 | 00 | F | B | Blank | Blank | - | Blank | CPM1300FBXP-200 |
MyEatonFAQs
